1967-68 Chevrolet, GMC C10 Pickup Pitman Arm with Manual Steering 1st Design
SKU: 18681-OER
$66.95
Out of Stock
Shipping:
Ground
Vehicle Fitment:
- 1967 Chevrolet C10 Panel
- 1967 Chevrolet C20 Panel
- 1967 Chevrolet Truck
- 1968 Chevrolet Truck
- 1967 GMC Truck
1967-68 Chevrolet, GMC C10 Pickup; Pitman Arm; with Manual Steering; 1st Design
Quality reproduction of the original pitman arm designed for various 1967-68 Chevrolet/GMC models. Manufactured to exact factory specifications. Each assembly features heat treated components and forging, and precision machining tolerances. Replacing this component improves steering response; reduces wander and vibration. Assembly includes: (1) Pitman Arm, (1) Dust Seal, (1) Castle Nut, (1) Cotter Pin, (1) Grease Fitting.
Product Specifications
- Stud Dia. Small End Of Taper: 0.668
- Sector Shaft Dia.: 1.125
- Sector Shaft Spline Large Inner Diameter: 1.028
- Length Center to Center: 5.404
- Key Way (Male or Female): Male
- Off Set: Up
- # of Splines: 32
- Hardware Included: Yes
- Arm Type: Bent
- Arm Fixture: Stud
- Arm Fixture Stud Thread/Hole Inside Diameter: 5/8-18
- Greasable: Yes
Chevrolet Applications:
- 1967-1967 Chevrolet C10 Panel (manual steering)
- 1967-1967 Chevrolet C20 Panel (manual steering)
- 1967-1968 Chevrolet C10 Pickup (manual steering)
- 1967-1968 Chevrolet C20 Pickup (manual steering)
- 1967-1968 Chevrolet C30 Pickup (manual steering)
- 1967-1968 Chevrolet C10 Suburban (manual steering)
- 1967-1968 Chevrolet C20 Suburban (manual steering)
- 1967-1967 Chevrolet P10 Series (manual steering)
- 1967-1968 Chevrolet P10 Van (manual steering)
- 1968-1968 Chevrolet P20 Van (manual steering) (center-to-center length 5.404″)
GMC Applications: Manual Steering
- 1967-68 GMC C15/C1500 Pickup (1st Design) (manual steering)
- 1967-68 GMC C25/C2500 Pickup (1st Design) (manual steering)
- 1967-68 GMC C15/C1500 Suburban (1st Design) (manual steering)
- 1967-68 GMC C25/C2500 Suburban (1st Design) (manual steering)
- 1967-68 GMC P15/P1500 Van (1st Design) (manual steering)
- 1967-68 GMC P25/P2500 Van – 3/4 ton (1st Design) (manual steering)
>
Original Equipment Reproduction - OER - is the leading manufacturer and distributor of quality classic automotive restoration parts and accessories. OER products are meticulously manufactured to replicate the OEM appearance, quality and fit that meets or exceeds the original factory specifications.
Fitment:
- 1967 Chevrolet C10 Panel
- 1967 Chevrolet C20 Panel
- 1967 Chevrolet Truck
- 1968 Chevrolet Truck
- 1967 GMC Truck
- 1968 GMC Truck